Laundry
Washer Won't Drain or Spin? Common Causes and Easy Fixes
A washer full of water, or clothes still dripping at the end of a cycle, usually comes down to one of a handful of causes. Start with the simple ones.
Safety first: unplug the washer before checking hoses or opening the pump filter. Have towels and a shallow tray ready, as water may come out.
Is the load unbalanced?
A washer won't spin at full speed if the load is lopsided, such as one heavy towel, a rug or a single pair of jeans. It protects itself by slowing down or stopping. Spread the items evenly and run a drain-and-spin cycle again. Very small loads can cause this too.
Is the drain pump filter clogged? (front-loaders)
Most front-load washers have a pump filter behind a small door at the bottom front. Coins, hair ties, buttons and lint collect there and block draining.
- Lay towels down and place a shallow tray under the door.
- Open the door and pull out the small drain tube if your model has one, and let the water empty.
- Slowly unscrew the filter, clean it out and screw it back in firmly.
Check your manual, because the location varies by brand. Many top-loaders don't have a user-cleanable filter.
Is the drain hose kinked or blocked?
Pull the washer out gently and check the drain hose isn't kinked behind the machine. Make sure it isn't pushed too far into the standpipe, and that the standpipe or laundry sink drains freely.
Is the lid or door lock working?
Washers won't spin unless the lid or door is detected as closed and locked. If the lock is broken, or the lid switch is worn, the washer may fill and wash but never spin. A clicking lock that won't engage, or an error code about the door, points here.
Are you using the right detergent?
High-efficiency (HE) washers need HE detergent. Regular detergent, or simply too much of it, creates heavy suds that the washer has to break down before it can drain and spin. Fewer suds usually means a faster, fuller spin.
Is the washer showing an error code?
Most modern washers show a code when something goes wrong. Write it down along with the model number before you call us. It helps us bring the right part on the first visit.
When should you call a technician?
Call us if the washer still won't drain after cleaning the filter and checking the hose, if you hear humming or grinding without draining, or if the door won't lock. The drain pump, lock assembly, lid switch or control board may need replacing.
Common questions
Where is the drain filter on a front-load washer?
On most front-loaders it's behind a small panel at the bottom front. Put towels and a shallow tray down first, because water will come out when you open it.
Can too much detergent stop a washer draining?
Yes. Too much soap, or non-HE detergent in a high-efficiency washer, makes extra suds that can slow draining and stop the spin. Use the right HE detergent and measure carefully.
Why does my washer shake so much on spin?
Usually an unbalanced load or a washer that isn't level. Spread the load evenly and adjust the feet. If it still shakes, worn suspension parts may need replacing.